Simplifying integration of sensor data using NFC enabled Multi-Sensor Node

Instructor(s): John Tran

When: 05/20/2020 14:00:00 (EST)

Duration: 2 hours

As NFC becomes ubiquitous, its applications range from mobile payment to sensor data logging. During this approximately 2 hour workshop, you will learn how to integrate NFC, sensors and a microcontroller to create an NFC Sensor node. This workshop will combine the STM32L031 low-power MCU, ST25DV NFC Dynamic Tag IC, HTS221 Humidity and Temperature Sensor, LPS22HB Barometer/Altimeter and LIS2DW12 3-axis accelerometer into the NFC Sensor node.

This workshop will cover the following topics:

  • Overview of NFC Technology
  • ST NFC Product Portfolio
  • ST Sensors Technology
  • Firmware and hardware structure
  • Using ST25R3911B NFC reader to read sensor data from the Sensor Tag.

The NFC hands-on will use the following kits and are available from our Distributors such as DigiKey or Mouser Electronics.

- ST25R3911B-DISCO (this is an NFC/RFID discovery board)
https://www.st.com/content/st_com/en/products/eval...

- STEVAL-SMARTAG1 (this is an NFC/RFIF evaluation board)
https://www.st.com/content/st_com/en/products/eval...

- CABLES USB A to Micro B

- CR2032 battery

Go to Workshop

Secure and Non-Secure application co-existence using TrustZone security technology

Instructor(s): Bob Waskeiwicz, Tim Nakonsut

When: 05/21/2020 10:00:00 (EST)

Duration: 2 hours

This 2-hour hands-on workshop will use the STMicroelectronics NUCLEO-L552ZE-Q board to configure and activate the Cortex-M33 TrustZone to secure an application. A Blinky application will be used to demonstrate how the STM32L5 TrustZone can secure the peripherals and memory. The workshop will be divided into approximately 20-minute segments alternating between lecture and hands-on. The STM32CubeMX configuration tool will be used to configure the STM32L5 device and to generate the Blinky LED application code for secure and non-secure applications. No source code compiler or IDE is required as the pre-complied binaries will be provided. The STM32cube Programmer tool and the embedded STLINK/V3 will be used to load the binaries into the STM32L5 device.

Workshop Agenda (may change prior to event)

1.Overview of the STM32L5 and Cortex M33 Device
Hands-On: Configure and download a non-secure Blinky application

2. Overview of the TrustZone
Hands-On: Configure and download a secure Blinky application

3. Review the secure and Non-Secure application co-existence using TrustZone
Hands-On: Add the non-secure Blinky application to the trusted application.

4. Review the trustZone Faults and Regression
Hands-On: Change the non-secure Blinky application to attempt access to the secure LED.
Hands-On: Turnoff and mass erase the STM32L5 TrustZone.

The materials for this workshop can be downloaded at:

https://www.dropbox.com/sh/9r810zc8pjxg83e/AADBTOrcSGIJX43auwkT_ziya?dl=0

Go to Workshop

Creating Advanced User Interfaces with STM32 Microcontrollers

Instructor(s): Mike Hartmann, Soren Mikkelsen

When: 05/21/2020 12:00:00 (EST)

Duration: 2 hours

In today's fast-paced and interactive world, it is necessary for technology to provide a simple and compelling experience to the end user.

Through advancements in graphics software frameworks and embedded technology and integration, this can be easily achieved with the STM32 microcontrollers. In this 2-hour hands-on workshop, you will be introduced to the STM32 Microcontrollers with advanced graphics technology. You will be introduced to graphics software frameworks and tools, and get hands-on experience using the STM32H7B3I-DK discovery kit with the latest STM32H7 microcontroller and the TouchGFX Designer tool.

Workshop Agenda:

  1. Advanced Graphics with STM32 Microcontrollers
  2. STM32 Graphics Software and Tools
  3. Hands-on: Quick Start with STM32H7B3I-DK Board
  4. STM32 Graphics Ecosystem and Support
  5. Hands-on: Custom Project Start with STM32 + TouchGFX

Note: The STM32H7B3I-DK board will be available at a discounted cost of $20.00 excluding shipping and handling fee to the first 100 registrants using a business email address. An email with a dedicated board link to Digi-Key Electronics website will be provided.

The materials for this workshop can be downloaded at:

https://www.dropbox.com/sh/gsvu5d8u6d9e4ga/AAC2chHAdj-q2SzmEJe5VRjUa?dl=0

Go to Workshop

OUR SPONSORS